Mold Remediation/Removal Steps By Mold Xterminators

Picture of Black Mold

Mold Remediation
 If mold growth has occurred or materials have been wet for more than 48 hours. Even if materials are dried within 48 hours, mold growth may have occurred. Items may be tested by professionals if there is doubt. These guidelines are for damage caused by clean water. If you know or suspect that the water source is contaminated with sewage, or chemical or biological pollutants, then Personal Protective Equipment and containment are required by the Occupational Safety and Health Administration (OSHA).
1= Contain damage area ( By setting up a containment field) to prevent mold contamination in other areas of structure or place.
2= Removed damage area.
3= Heppa vacuum walls and furniture.
4= Use a bactericide, virucide, fungicide and disinfectant product for mold removal and prevention.
5= Clean a/c units coils and ducts Be careful not to damage flex ducting.
6= Fog with a virucide, fungicide and disinfectant of rooms and a/c ducts for better mold removal and prevention of spores and harmful air particles.
7= Use air scrubbers to finalize the mold spores removal.
8= Perform a mold clearance Testing to restore building or place to a fungi free ecology.
Same remediation method for commercial, industrial, maritime and residential buildings.


This entry was posted in Mold, Restorations and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply